- Home
- Equipment
Show results for
Refine by
B&W Tek Environmental Equipment & Supplies
25 equipment items found
Premium
Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)
This is our High Power Continuous Tungsten/Halogen light source, the BPS2.0. This module features a stronger lamp and a fan for temperature control while being a cost-effective stable source for reflectance spectroscopy applications. Connectorized with SMA905, this source is convenient to install and operate in your custom spectroscopy ...
Premium
Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)
The NR-LVH is a liquid vial holder adaptor for use with BAC100 lab grade Raman probes with shaft diameter of 9.5mm. This is compatible with 15 mm ...
Premium
Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)
Replacement combination Deuterium and Tungsten bulb for ...
Premium
Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)
Get started quickly with Discover-It-Yourself UV-Visible. Build your own spectroscopy system from the ground up, or pick from one of our crafted application focused kits. Multiple options make it easy to start. Each tier is built with your application in mind with proper sampling and light source ...
Premium
Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)
Deuterium gas when excited with a current will produce a clean continuous spectrum through the UV region (200-400nm) For spectroscopy techniques which require the need to have a stable source in the UV region this becomes a requirement. These turn-key, fiber coupled light sources come with a built-in Tungsten/Halogen lamp to complete the spectrum range and allow for broadband use cases from the ...
Premium
Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)
The FRC100 is a right angle transmissive near cosine corrector for measuring spectral irradiance. Featuring a diffuser made from PTFE, the FRC100 can be used from the UV to the NIR range. When compared to integrating spheres, the FRC100 provides greater optical efficiency and improved signal sensitivity over a broad spectral ...
Premium
Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)
This polystyrene validation cap is compatible with all BAC102 lab grade fiber optic Raman ...
Premium
Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)
The BCR100A cuvette holder is designed for Raman sampling and holds a standard 12.5mm x 12.5mm cuvette for measurements of liquid or powder samples. The cuvette holder is designed to work with B&W Tek, Inc. Raman probes by providing a stop to prevent the probe shaft from hitting the cuvette and by providing an excitation light trap to reduce background ...
Premium
Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)
Introducing a one of a kind opportunity to build and fully customize your own spectrometer system. Take advantage of our high quality manufacturing capabilities, and setup a spectrometer system using our unique flexible OEM setup that will satisfy all your unique ideas. Our OEM modular setup is designed to keep up with all your application and performance demands as you Discover It Yourself. Stay ...
Premium
Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)
The Exemplar series represents our highest performance UV-NIR series spectrometers with back thinned CCD technology and deeper TE Cooling to reduce dark noise. These models are cooled from 0°C to -25°C, and come in various sizes, and optical geometries. Low stray light and high QE (quantum efficiency) make them a Pro for performance and price. The Exemplar Plus is a high performance smart ...
Premium
Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)
Compact, temperature-compensated linear CCD spectrometer with SMA 905 fiber coupler for light input. The Quest line features or smallest, lightest and lowest priced USB spectrometers. Ready for any measurement in the UV and Visible range, the Quest spectrometers are your starting point for applications like laser metrology, absorption and ...
Premium
Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)
The fiber optic dip probe (FDP) is a 316S steel immersion probe for absorbance and transmission (380 to 2200 nm) of liquid samples with a pathlength from 1 to 20 mm. The cavity reflects light back through the sample and into the collection optical fiber in a setup commonly referred to as a ...
Premium
Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)
Fiber Optic Collimating Lens Assembly for use with our Fiber Patch Cords. The CLA-SMA is a 9 mm focal length lens assembly that converts divergent light rays into parallel rays. It has an effective aperture of 4 mm with NA 0.22 single core fiber. The CLA-SMA attaches to an SMA 905 connector of a fiber optic patch cord and fiber assemblies. When used with a fiber cord attached to a light source, ...
Premium
Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)
This integrating sphere is machined from PTFE and is the ideal solution for the measurement of diffuse light. It has a diffuse reflectance of 99% between 400nm and 800nm, >98% between 300nm and 1800nm (UV-Vis-NIR region), and >92% between 250nm and 2500nm. Great for characterizing light sources or for use in a radiometric calibrated ...
Premium
Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)
This fiber patch cord is a "bundle fiber" and terminates with SMA905 connectors on both ends (FC connectors available upon request). These patch cords connect with ease to our spectrometers, light sources and sampling accessories. This fiber core size is 100 mm with a standard length of 1.5 meters, custom lengths available upon request. The range is 350 to 2400 ...
Premium
Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)
This is a spring-loaded cuvette holder compatible with standard cuvette or cuvette adapters measuring 1cm in size. The cuvette sample holder provides either 2 or 3 SMA 905 fiber couplers with collimated optics in different special configurations which make it ideal for use with any standard fiber coupled spectrometer together with any fiber coupled light ...
Premium
Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)
The SCL101 wavelength calibration light source is a compact device containing a gas-filled lamp. When energized, this lamp emits precise, repeatable spectral lines used to accurately calibrate optical ...
Premium
Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)
This is our Low Power Continuous Tungsten/Halogen light source, the BPS101. This small mountable module is our low-cost stable source which makes great for applications like Absorbance Spectroscopy. Connectorized with SMA905, this source is convenient to install and operate in your custom spectroscopy ...
Premium
Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)
The Sol is our shortwave infrared (SWIR) spectrometer series for absorption, transmission, reflectance and Raman applications. Contrary to the silicon-based CCD integrated in our other UV-NIR models, the Sol™ series utilizes an InGaAs based linear array for detection. With three different configurations in the NIR, they are perfect for your for your next measurement quest. TE-cooled, 512 ...
Premium
Manufactured by:B&W Tek based inPlainsboro, DELAWARE (USA)
Our fiber optic reflectance probes are typically constructed with a bundle of 7x optical fibers in a stainless steel ferrule to allow for specular and diffuse reflectance measurements by splitting the illumination and collection channels between at least 2 terminated ...